SAS-TEC Tripleflex Ultra Thin SIde Cut Vented CE UKCA LEVEL 2 Motorcycle Biker Jacket Elbow Armour Insert

Large level 2 protector certified exclusively for the elbow area with side cut-outs for an optimum fit even with heavily angled joints.

Numerous ventilation holes and the SAS-TEC-protected Tripleflex design ensure maximum comfort and a perfect fit, while the tear-resistant fabric on the back provides even more safety.

Residual force below 20 kN (Limit Level 2), at minus 10 degrees Celsius even below 15 kN.

We recommend this protector for use on the elbow of textile and leather protective clothing.

-----------------------------

Article: SC-1/ECB2air
Weight: ca. 65 g / piece
Dimensions (L/W/H): ca. 250/120/10 mm
Protection level: 2 (mean value below 20 kN)
Protection area: E Type B
Symmetrical
--------------------------
    Protectors undercut the prescribed standard EN 1621-1:2012, Level 2 by about 10 percent
    Protectors are not destroyed by an impact and can still be used
    Protectors are lightweight
    Protectors are highly flexible
    Protectors are washable
    (remove, hand launder separately / water absorption less than one per cent)